MAYA Global Group Releases Technical Guidance on Underground Steel Pipeline Corrosion Control and Cathodic Protection Surveys
Steel remains the primary structural material for buried transmission and distribution pipelines due to its tensile
Press Release Disclaimer: This is a press release distributed through the XPR Media network. It has not been independently verified by our newsroom.
![]()
Steel remains the primary structural material for buried transmission and distribution pipelines due to its tensile strength, weldability, and cost efficiency.
KOKHAV YA’IR, Israel, November 18, 2026 — MAYA Global Group, a provider of underground infrastructure detection, utility mapping, and pipeline integrity assessment services, today released a technical industry briefing examining the electrochemical mechanisms of buried steel pipeline corrosion, multi-layer protective defense methods, and regulatory inspection protocols. The briefing outlines how oil, gas, and water pipeline operators monitor corrosion control systems through close interval potential surveys and high-accuracy subsurface utility positioning.
Steel remains the primary structural material for buried transmission and distribution pipelines due to its tensile strength, weldability, and cost efficiency. However, buried steel remains exposed to continuous electrochemical reactions when moisture, oxygen, and electrical potential variations interact with the pipe surface. Left unmitigated on high-pressure gas or liquid transmission infrastructure, external corrosion leads to wall thinning, localized pitting, and significant safety and financial liabilities.
According to the technical overview, subsurface pipeline corrosion operates as an electrochemical circuit requiring four simultaneous elements: an anode where metal loss occurs, a cathode that remains protected while completing the chemical reaction, an electrolyte formed by moist surrounding soil, and a continuous metallic path provided by the steel pipe itself. Variations in soil chemistry, moisture content, aeration, or surface metallurgy along a pipeline route establish natural anodic and cathodic zones that drive metal deterioration.
Several environmental and operational variables accelerate corrosion rates along buried corridors. Low-resistivity soils—such as wet, saline, or clay-rich formations—conduct electrical current readily and increase metal loss. Localized coating damage concentrates corrosion current onto small exposed steel areas, producing deep pitting. Transitions between dissimilar soil types generate natural galvanic cells, while direct current (DC) stray currents from transit systems, industrial facilities, or neighboring cathodic protection installations can force current onto and off the pipe. In oxygen-depleted environments, microbiologically influenced corrosion (MIC) caused by subsurface bacteria further degrades steel, and direct metallic contact with dissimilar metals such as copper creates destructive galvanic couples.
To prevent structural degradation, pipeline operators rely on a two-tier defense combining physical barrier coatings with cathodic protection survey verification. Primary external coatings—including fusion-bonded epoxy and multilayer polyethylene or polypropylene systems on modern lines, or coal tar, asphalt, and tape wraps on legacy assets—isolate steel from soil electrolytes. Because construction handling creates minor coating defects known as holidays and materials degrade over decades of service, secondary cathodic protection (CP) converts the entire pipeline into the cathode of a controlled electrical circuit using either sacrificial galvanic anodes made of magnesium or zinc, or impressed current systems powered by rectifiers.
Verification of cathodic protection performance depends on periodic electrical measurements, primarily pipe-to-soil potential readings taken with a high-impedance voltmeter and a copper-copper sulfate reference electrode positioned directly above the buried pipe. Industry standards such as AMPP (formerly NACE) SP0169 specify an instant-off polarized potential of -850 millivolts or more negative, or a minimum 100-millivolt polarization shift, to confirm adequate protection. In the United States, federal gas pipeline safety regulations mandate annual CP testing at intervals not exceeding 15 months, alongside rectifier inspections six times per calendar year at intervals not exceeding two and a half months.
Because fixed test stations may be spaced a kilometer or more apart, point measurements alone cannot detect localized protection deficits or coating defects between posts. Operators address these gaps through detailed close interval potential surveys (CIPS) and direct current voltage gradient (DCVG) assessments conducted at meter-level intervals along the right-of-way. MAYA Global Group integrates subsurface route mapping and depth-of-cover positioning with corrosion survey measurements so every potential reading and coating defect indication is tied to its exact geographic coordinates.
“Accurate pipeline positioning and depth-of-cover data are essential prerequisites for interpreting cathodic protection and voltage gradient surveys,” said Moshe Siri, Owner and CEO of MAYA Global Group. “When survey readings are precisely aligned with subsurface utility mapping, operators can distinguish genuine under-protected coating defects from interference caused by casings, foreign crossings, or adjacent metallic structures.”
Operational indicators of declining corrosion control include pipe-to-soil potentials trending less negative over consecutive inspection cycles, rising rectifier current output needed to maintain baseline protection levels, nearby transit or parallel pipeline construction introducing stray interference, external metal loss observed during unrelated excavations, and leaks on aging, poorly coated segments. Even when CP systems are active, corrosion can occur if protection levels fall below threshold criteria, stray currents interfere with circuit balance, or disbonded coatings shield underlying steel from protective current—underscoring the need for continuous survey verification across the asset lifecycle.
About MAYA Global Group
MAYA Global Group is an international subsurface engineering and infrastructure intelligence firm specializing in underground utility detection, ground-penetrating radar mapping, cathodic protection surveys (CIPS and DCVG), UXO detection, and pipeline rehabilitation support. Utilizing artificial intelligence and non-destructive geophysical technologies, the company delivers spatial and integrity data for energy, water, transportation, and construction projects worldwide. More information is available at mayaglobal-tm.com.
Media Info
Contact Person: Moshe Siri
Company: MAYA Global Group
Email: globalbiz@maya-tm.com
Website: https://mayaglobal-tm.com/
Address: 14 Bazalt St., Kokhav Ya’ir – Tzur Yigal, Israel
Media gallery


